These straps have been designed specifically to compliment watches with 26mm lug width.
Materials – Using the very best materials inside and out, Dangerous9straps are made from only the very best quality leathers and exotic skins and threads available. Nothing goes inside of a Dangerous9strap that I wouldn’t be proud to have on the outside. We use only vegetable tanned leather mid-layers and padding layers (unlike most manufactured straps). These are the very same expensive, high quality leathers we use to build our bespoke leather straps. This guarantees our straps will be solidly built and with proper care, last for many years. All Dangerous9straps are hand saddle stitched using the finest French milled, Au Chinois Câblé linen thread.
Beautiful and Exotic linings – We believe the luxury of a Dangerous9 watch strap should extend all the way to the lining. And that the luxury is also what’s on the inside – even if no else knows it’s there – you’ll know. The smoothness of Tripon Monterrey Kidskin or the soft comfort of our Australian Kangaroo Gloving leathers, sometimes offering a flash of color as you put your watch on can be as impactful as the beautiful leather on the outside. These lining leathers are perfectly matched to the outside strap leather and have been carefully selected to provide a private luxury experience that is the essence of a Dangerous9strap.
All these straps will be fitted with lug tubes or spring bars upon your request for no additional cost. However, please bear in mind that our spring bars will NOT fit the latest Panerai watches designed to fit only specially designed Panerai spring bars. Also, if your strap has lug tubes installed, and you wish to use it on another watch that takes spring bars, be sure to remove these before installing on a spring bar watch or you will not be able to access the spring bar to remove the strap!!
Technical data: [drop down menu on each Panerai product page]
Strap Widths:
Lug Width: 26mm, buckle width: 24mm
Buckles:
24mm, ’D9’ Logo, Pre-V style Screw-in buckle – brushed, polished or Matte PVD finish.
Please note: Our straps have not been designed to fit deployant clasps.
Buckle Holes:
All of our Panerai straps have holes punched as follows:
Short (115/70mm): 6 x 4mm, 7mm apart on center; first hole at 45mm from lug end.
Medium (125/75mm): 6 x 4mm, 7mm apart on center; first hole at 50mm from lug end.
Long (135/85mm): 6 x 4mm, 7mm apart on center; first hole at 60mm from lug end.
Our 26mm lug tubes will fit all 1.7mm Panerai lugs bars. Our 26mm spring bars are 1.78mm in thickness and will fit most watches that require spring bar attachments, however, they will NOT fit the latest model Panerai watches that use specially designed Panerai spring bars. If your watch uses thicker lug screw bars, in most cases, we can adjust these straps to fit, but with no lug tubes; please contact us so that we can make the proper adjustments as needed.